Izdelki za visok tlak (652)

Riduttore di alta pressione in ottone versione con tappo per manometro. Uscita portagomma GPL

For special applications, individual high-pressure systems are required, which KAMAT can provide from the initial project idea to the turnkey installation, with 100% of the production taking place in-house. This also applies to electric high-pressure pumping units. Depending on the application, our customers can choose between different drives, power transmission components, PLC controls, measuring systems, data transmission, remote controls, pneumatic and electric valve controls, chassis and sound insulation equipment. Even the electrical units supplied on the base frame are fully operational and can be used directly by the customer. Electric units have the advantage of emission-free operation at extremely low noise levels. ATEX certified high pressure electric units can also be used in ATEX hazardous areas.

Neben dem Standardprogramm an Hochdruck-Plungerpumpen bieten wir auch eine große Auswahl von Edelstahlpumpen in unterschiedlichen Werkstoffen an, ebenso wird dem Bedarf für besondere Anwendungen Rechnung getragen. Eine Ausstattung mit Sonderdichtungen wie z.B. Viton, Teflon und FFKM o.ä. ist auf Kundenwunsch in der Regel möglich.

0.3mm 45° & 100° Fogging Angle 70bar (1015psi) 105gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305) SKU:CSA30U1SSC-ND

Protection for hot temperatures Oil cooler – radiator for inside temperatures exceeding 40°C. This option comes along with the air-conditioning in the electrical control cabinet, the water cooled condenser for the HP Dryer. Specific selection of electric motor ; IP55 motor for hot and dusty environment, tropicalizing (see electrical options) Protection for cold temperatures Oil warming for inside temperatures between 1 and 5°C. Specific selections of cooling systems with protections items depending on site conditions (see separate cooling system options) Miscellaneous Condensate drain collector. Made from stainless steel, equipped with silencers and flexible rubber connections for collecting the condensates from the individual drains – Bekomat drain system used on the compressor, dryer – option- and receiver to simply be connected to the sewer ( flexible rubber hoses supplied suiting to a standard installation lay out – see the standard installation lay out drawing). Low sound...

Air poussiéreux. Ventilateur à transmission par poulie courroie et carter de protection. Turbine à pâles incurvées vers l'arrière. Taille 630 > 1600 T° maxi d'utilisation 90°C (350°C avec turbine de refroidissement) Débit entre 13 et 3252 m³/min (faire × 60 pour convertir en m³/h) Pression totale ente 180 et 2280 kgf/m² (faire × 10 pour convertir en Pascal) Puissance installée entre 3 et 500 kW Lien vers notre site web dédié aux ventilateurs industriels Marque:Cimme

Mild steel S235JR non Pressure bolted manholes - High pressure autoclave lids

In air conditioning and refrigeration technology, particularly in commercial and industrial refrigeration systems, environmentally friendly solutions are becoming more and more important. Optimum results are been obtained by an increase in efficiency and the use of ecologically safe refrigerants such as CO2 (R744), which are mainly used in the transcritical part with higher operating pressures. However, the use of CO2 leads to higher operating pressures potentially up to 130 bar. SANHA Ref HP fittings are specifically designed for such operating pressures. They are ideally suited for pipes in refrigeration systems with a maximum operating pressure of up to 130 bar (other pressures on request), a minimum temperature of -196 ° C and a maximum temperature of 150 °C for fluids in Group 2 according to European Pressure Equipment Directive (PED 97 / 23 / EC). Bend 45° M/F

mit Schaltkontakten Für die Prozessindustrie, hochüberlastsicher bis 40, 100, 25 - Differenzdruckmessbereiche ab 0 … 60 mbar Hoher Betriebsdruck (statischer Druck) und hohe Überlastsicherheit wahlweise bis 40, 100, 250 oder 400 bar Messzellenflüssigkeitsdämpfung gegen hohe Druckänderungsgeschwindigkeiten Geräte mit Induktivkontakten für den Einsatz in explosionsgefährdeten Bereichen Geräte mit Schaltkontakt für SPS-Anwendungen

Electroaspirateur à haut rendement, il est utilisé pour aspirer l'air propre, ou pollué avec moyenne et haute pression. La coque construite en tôle d'acier peinte, entièrement soudée, apte à garantir une parfaite tenue d'air La turbine à pâles renversée équilibrée statiquement et dynamiquement est connectée directement au moteur électrique auto-ventilé conforme aux normes Européennes. Tous les supports de l'électroaspirateur (chaise, base) sont également réalisés en tôle de forte épaisseur. Domaine de travail : Débits faibles. Hautes pressions. Type d’ailette : Courbées, positives Applications : Pour transport pneumatique, poussière, séchage, pressurisation. Convient à l'emploi dans le domaine industriel des fonderies, fabriques de pâtes, fours, chimique. Températures du fluide standard : -10÷+60°C. Type de fabrication Ventilateur en tôle de Fe360, turbine en Fe360 équilibrée statiquement et dynamiquement. Données de fonctionnement : Conditions de l’air à l’aspiration...

Gas-Liquid separator for High pressurized fluids

Çeviksan Yüksek Basınç ve Mini Filtreler

All media contacted parts are resistant against acid and demineralised water, media must be compatible with V2A stainless steel, version 1.4301. Mobile, integrated 60 l tank, stepless adjustable pressure, metering device for cleaning agent, water shortage control, overheat fuse. Volume 2,4 l/m. 10 KW, 16A. 5 m hose with large pistol, hand screw coupling and lance ESR-LA 600. Hose with quick change couplings at the device.

The sensor model 8228 with its measuring accuracy of 0.05% F.S. (for the measuring ranges ≤ 1 bar, the measuring accuracy is 0.1% F.S.) ideally suited as a reference sensor. The compact dimensions, the robust housing and the industrial-grade output signal result in a very wide range of applications. All components in contact with media are made of stainless steel. An integrated measuring amplifier converts the measuring signals directly into interference-free voltage signals or current signals that can be transmitted over long distances. With the „gage“ measurement type, the pressure measurement is carried out against the ambient pressure, the sensor has a bore that is protected against ambient influences to compensate for the ambient pressure. With the „Absolute“ measurement type, the applied pressure is measured against an enclosed vacuum; this measurement type is available from the measuring range 0 ... 250 mbar. The electrical connection is made via an M12 x 1 connector. Measuring range:0 ... 200 bar Kind of measurement:Against atmospheric pressure Signal output:0 … 10 V / 4 … 20 mA Range of operating temperature:-20 ... +80 °C Burst pressure/ -protection:min. 200 % Dead volume:0.757 cm³ / 0.5 cm³

Compresseurs à air alternatif à haute pression, compresseurs rotatifs et turbocompresseurs. Excellente stabilité thermique du lubrifiant dans des conditions de haute température. Faible tendance au moussage pour les applications de turbocompresseurs. Faible volatilité. Faible évaporation et dépôts de carbone. Protection contre la rouille et la corrosion. Démarrage du compresseur à 20 °C. Conditions de fonctionnement à une température de refoulement allant jusqu'à 250°C et une pression de refoulement allant jusqu'à 200 bars.

CTT has become a well-known supplier of nano-homogenization equipment at home and abroad with its deep technical accumulation and innovation capabilities. We not only provide high-quality products, but also provide comprehensive technical support and customized services to ensure that customers can get the most suitable solutions for their needs. Our products are widely used in many industries such as pharmaceuticals, cosmetics, food processing, nanomaterial research and development, and have won the recognition and trust of our customers. We have a team of experienced engineers and scientific researchers. They continue to explore and research to ensure that our products always maintain their leading position in the industry. Our production base is equipped with advanced manufacturing and testing equipment to ensure that every piece of equipment shipped meets the highest quality standards.

High pressure quick disconnect fittings

Aluminum casting workshop: producing castings by means of die-casting, low pressure casting and gravity casting. The Workshop capacity is 1500 tons of good cast per year. Aluminium cookware casting workshop: producing cookware with non-stick casting. Machine-assembly workshop: manufacturing of machined parts and fabricated assemblies. Alloys manufacturing subdivision: recycling of aluminium wastes and dross. Manufacturing of aluminium secondary alloys.

It is the system that allows the crushed goods to be transported by suction. It has the highest efficiency, minimum energy consumption and it is versatile and silent. The fan, mounted on the chassis with a steel cage, works on rubber feet (wedges) in order to prevent vibration and vibration. Since its static and dynamic balance is taken, the noise level is minimized, the inlet and outlet pipes are supported with rubber flanges to prevent vibration transfer. Applications Fields ◾ Food Industry ◾ Flour and Semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Oil factories ◾ Wheat, barley, rye oats operating facilities

Release agent concentrate for structural parts and natural ductile alloys - Tried and tested release agent, which is qualified for glueing and welding of structural castings Temperature Range 130 °C to 350 °C Alloy Al, Mg, Zn Properties and Advantages • ideally suitable for conventional as well as micro-/minimal spraying • approved for glueing, welding, painting and powder coating • no build-up • die wetting already at lower temperatures

STAUFF High Pressure Filters type SFZ are designed for sandwich plate mounting in hydraulic and lubrication applications, with a maximum operating pressure of 315 bar / 4.560 PSI. Used together with STAUFF SE series Filter Elements, a high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass, reverse flow, non-return or multi-function valve Clogging Indicator ( available as an option ) ▪ Visual, electrical or visual-electrical differential pressure indicator Filter Elements ▪ Filter elements of SE series Construction ▪ High pressure filter designed for sandwich plate mounting ▪ Available as left or right version Operating Pressure ▪ Max. 315 bar / 4.560 PSI Nominal Flow Rate ▪ Max. 30 l/min / 8 US GPM Materials ▪ Filter head: Free Cutting Steel ▪ Filter bowl: Cold Drawn Steel Media Compatibility ▪ Mineral oils, other fluids on request

High pressure flow sight glasses Type 522 with female thread connection Use: Flow Sight glasses for high pressure are suitable for installation in piping of several types. The sturdy construction allows the observation of flow or filling processes at high operating pressures of up to 160 bar.

Features ■ Pressure transmitter for the measuring of relative and absolute pressures of gases, vapors and liquids ■ Stainless steel case in sturdy design, degree of protection IP 65/67 ■ Accuracy 0.1 % ■ High-resolution graphic display with Intuitive 4-button operation and backlight ■ Comprehensive parameterising and simulation and diagnostic functions ■ Nominal range 0.25 bar to 400 bar ■ Turndown up to 100:1 ■ Measuring rate up to 100 Hz ■ Output signal 4…20 mA with HART® protocol ■ Digital communication via PDM, FDT/DTM, 375/475 Field Communicator ■ Output functions: linear, invers, square root, table function ■ Media temperature -40…100 °C ■ Wetted parts stainless steel ■ Case design: process connection bottom or back ■ Process connections: various screw-in thread with internal diaphragm ■ Approved according to NAMUR 95 Options ■ Explosion protection; SIL2; material certificate and calibration certificate per EN 10204 ■ Degree of protection IP 69K Measuring rate:up to 100 Hz Measurement range:from 25 mbar to 400 bar Accuracy:0.1%

Diese Räder besitzen in Abhängigkeit von Volumenstrom und Druck ein Verhältnis zwischen 0,15 bis 0,5 zwischen Saugmunddurchmesser und Außendurchmesser. Die Krümmung der Schaufel entscheidet bei gegebenen Außendurchmesser und Drehzahl über die Höhe des Totaldruckes und den Statischen Druckanteil. Die Schaufeln bei Hochdruck- und Mitteldruckrädern sind meist rückwärtsgekrümmt. Es gibt Ausführungen mit ebenen und gezogenen Deckscheiben. meist strömungsgünstiger

Laboratory high pressure reactor system Reactor volume: 0.1 - 1.0 liter Pressure: -1 (FV) to +200 bar Temperature: -20 °C to +300 °C Material: stainless steel, Hastelloy® Other materials, pressures & temperatures are available This high pressure reactor system is designed for the use of interchangeable steel pressure vessels. Safety features guarantee safe reactions under pressure. The stainless steel or Hastelloy reactors ensure high resistance against acids. Visual process control and monitoring is also possible under high pressure by using steel pressure vessels with sight glasses. Various low to high torque magnetic drives ensure efficient mixing and stirring low to high viscosity process media as well as excellent heat transfer. The fast action closure and vessel lift makes changing vessels quick and easy without the use of tools. The modular setup of the midiclave system allows changing or upgrading for new tasks at any time. Reactor volume:0.1 - 1.0 liter Pressure: -1 (FV) to +200 bar Temperature:-20 °C to +300 °C Material:stainless steel, Hastelloy®

Superior Tube supplies high pressure tubes that exceed current industry standards and we supply high quality products that are used in oil and gas extraction, high pressure liquid chromatography, military applications, water jet cutting, and more. Our tube mill manufactures high pressure tubing in straight lengths, and in a variety of corrosion resistant austenitic, nickel alloys, and stainless steels. Sizes run from 0.050” right up to 1.250” outside diameter, with wall thicknesses between 0.0175” and 0.218”. Operating conditions can require our products to be service rated above 60,000psi operating pressure, with tensile strengths greater than 220ksi. Please note that we have a minimum order value of £10,000.

Miscela di alta qualità, frutto di una centenaria esperienza. Le più pregiate origini di caffè sono tostate separatamente e successivamente miscelate secondo antiche ricette, per garantire una qualità equilibrata e costante. L’innovativa confezione è dotata di una speciale valvola monodirezionale ad alta pressione che non consente la fuoriuscita degli aromi naturali del caffè appena tostato, per una più lunga conservazione dei chicchi nella propria atmosfera originale. La miscela mantiene così le proprie pregiate caratteristiche organolettiche e all’apertura offre un risultato in tazza eccellente con un’ottima costanza di rendimento.

Ce système vous offre la possibilité de nettoyer les élastomères dans un processus continu avec une efficacité maximale (le lavage à l’eau déionisée, déminéralisée ou ultrapure est facultatif). Les paniers de lavage sont automatiquement acheminés vers les stations de lavage respectives (> station de prélavage> station de rinçage> station de nettoyage haute pression> station de séchage haute pression) vers le magasin de retrait, à partir de la station de chargement. Les dimensions du lave-linge à processus continu dépendent des dimensions du panier que vous souhaitez (perforation de 3 mm à 15 mm possible), les modèles WD3, WD5 et WD9 avec différentes tailles sont disponibles en standard. Ce système est parfaitement équipé pour les exigences de l’Industrie 4.0. En standard, les données de processus peuvent également être surveillées à partir d’un poste de travail externe via le réseau (en option, via un serveur OPC UA). La construction se fait individuellement!

Der Hochdruck-Messumformer DMP 304 wurde speziell für Applikationen mit höchsten Anforderungen an Präzision und Zuverlässigkeit entwickelt. Basis der Produktreihe DMP 304 ist ein selbstkompensierter DMS, der auf einer gehärteten Edelstahlmessmembrane angebracht ist. Sein robustes Edelstahl-Gehäuse und der Einsatz im Ex-Bereich ermöglichen den Druck unter extremen Einsatzbedingungen zu erfassen. Merkmale: — Nenndrücke: 0 ... 2000 bar bis 0 ... 6000 bar — Genauigkeit: 0,5 % (Opt. 0,25 %) FSO — Verstellbarkeit des Nullpunktes und der Spanne über frontseitig zugängliche Potentiometer — Druckanschluss 9/16" UNF — 80 % Kalibriersignal mit MIL / Bendix-Stecker Optionale Merkmale: — Ex-Ausführung Zone Ex ia = eigensichere Ausführung — Druckanschluss M20x1,5 und M16x1,5 — Genauigkeit nach IEC 60770: 0,25 % FSO

a abrazadera Supra es la evolución de la abrazadera Super. Gracias a su diseño único, su montaje y desmontaje pueden realizarse sin necesidad de desmontar los tubos o gomas de su aplicación y sin desprenderse ningún elemento de la propia abrazadera. Al disponer la cinta de los bordes biselados, evita los cortes en los tubos y en las gomas. Cumple holgadamente con la directiva EU 2002/95/EC de fecha 1 de julio de 2006. La alta resistencia del tornillo, junto con su diseño, permite unos elevados pares de apriete. * Posibilidad de fabricar medidas especiales bajo pedido. * La presión máxima de aplicación dependerá del tipo de manguera y de la geometría del racord.Patentado mundialmente.